Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
CQUAD4 in bending test
#13
I have fixed the problem causing a crash with plate pressure load. Attached is a QUAD4 problem that you asked about. It is a thick plate and the bdf file is attached (you will have to change the extension as the forum would not allow .dat or .bdf). The theoretical thick plate solution for the max displacement is:

Max displacement: theoretical = 4.294E-07


Attached Files
.txt   AQ3U2S010-MIN4T.txt (Size: 16.17 KB / Downloads: 5)
Reply


Messages In This Thread
CQUAD4 in bending test - by O_Stodieck - 08-27-2020, 06:01 PM
RE: CQUAD4 in bending test - by Admin - 08-27-2020, 06:26 PM
RE: CQUAD4 in bending test - by O_Stodieck - 08-27-2020, 09:22 PM
RE: CQUAD4 in bending test - by drbillc - 08-27-2020, 08:40 PM
RE: CQUAD4 in bending test - by drbillc - 08-27-2020, 10:28 PM
RE: CQUAD4 in bending test - by Admin - 08-28-2020, 12:02 AM
RE: CQUAD4 in bending test - by O_Stodieck - 08-28-2020, 07:55 PM
RE: CQUAD4 in bending test - by drbillc - 08-28-2020, 12:05 AM
RE: CQUAD4 in bending test - by Admin - 08-28-2020, 12:24 AM
RE: CQUAD4 in bending test - by drbillc - 08-28-2020, 01:29 AM
RE: CQUAD4 in bending test - by Admin - 08-28-2020, 08:16 PM
RE: CQUAD4 in bending test - by O_Stodieck - 08-28-2020, 08:50 PM
RE: CQUAD4 in bending test - by drbillc - 08-29-2020, 12:59 AM
RE: CQUAD4 in bending test - by O_Stodieck - 08-30-2020, 11:28 AM
RE: CQUAD4 in bending test - by Admin - 08-29-2020, 07:57 PM
RE: CQUAD4 in bending test - by Admin - 08-30-2020, 04:45 PM
RE: CQUAD4 in bending test - by O_Stodieck - 09-03-2020, 08:56 PM
RE: CQUAD4 in bending test - by Admin - 09-03-2020, 11:59 PM
RE: CQUAD4 in bending test - by ceanwang - 09-04-2020, 12:06 AM
RE: CQUAD4 in bending test - by Admin - 09-04-2020, 03:50 PM
RE: CQUAD4 in bending test - by Admin - 09-09-2020, 12:30 AM
RE: CQUAD4 in bending test - by Admin - 09-09-2020, 02:40 PM
RE: CQUAD4 in bending test - by drbillc - 09-09-2020, 05:35 PM
RE: CQUAD4 in bending test - by O_Stodieck - 09-09-2020, 06:27 PM
RE: CQUAD4 in bending test - by Admin - 09-09-2020, 07:13 PM
RE: CQUAD4 in bending test - by drbillc - 09-10-2020, 01:15 PM
RE: CQUAD4 in bending test - by Admin - 09-11-2020, 05:33 AM
RE: CQUAD4 in bending test - by Admin - 09-13-2020, 01:53 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)