MYSTRAN Forum › MYSTRAN › MYSTRAN v
CQUAD4 in bending test

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Linear Mode
CQUAD4 in bending test
Admin Offline
Administrator
*******
Posts: 144
Threads: 46
Joined: Jan 2020
Reputation: 0
#8
08-28-2020, 12:24 AM
(08-28-2020, 12:05 AM)drbillc Wrote: Sorry, I used the wrong width (.075 rather than .15). But where did the 70E+09 for modulus come from?

Bill, there are two decks in the different posts and it was changed between them. Its a bit confusing, but maybe it was an attempt to try to make the composite more "isotropic-like". Not sure.
Find
Reply


Messages In This Thread
CQUAD4 in bending test - by O_Stodieck - 08-27-2020, 06:01 PM
RE: CQUAD4 in bending test - by Admin - 08-27-2020, 06:26 PM
RE: CQUAD4 in bending test - by O_Stodieck - 08-27-2020, 09:22 PM
RE: CQUAD4 in bending test - by drbillc - 08-27-2020, 08:40 PM
RE: CQUAD4 in bending test - by drbillc - 08-27-2020, 10:28 PM
RE: CQUAD4 in bending test - by Admin - 08-28-2020, 12:02 AM
RE: CQUAD4 in bending test - by O_Stodieck - 08-28-2020, 07:55 PM
RE: CQUAD4 in bending test - by drbillc - 08-28-2020, 12:05 AM
RE: CQUAD4 in bending test - by Admin - 08-28-2020, 12:24 AM
RE: CQUAD4 in bending test - by drbillc - 08-28-2020, 01:29 AM
RE: CQUAD4 in bending test - by Admin - 08-28-2020, 08:16 PM
RE: CQUAD4 in bending test - by O_Stodieck - 08-28-2020, 08:50 PM
RE: CQUAD4 in bending test - by drbillc - 08-29-2020, 12:59 AM
RE: CQUAD4 in bending test - by O_Stodieck - 08-30-2020, 11:28 AM
RE: CQUAD4 in bending test - by Admin - 08-29-2020, 07:57 PM
RE: CQUAD4 in bending test - by Admin - 08-30-2020, 04:45 PM
RE: CQUAD4 in bending test - by O_Stodieck - 09-03-2020, 08:56 PM
RE: CQUAD4 in bending test - by Admin - 09-03-2020, 11:59 PM
RE: CQUAD4 in bending test - by ceanwang - 09-04-2020, 12:06 AM
RE: CQUAD4 in bending test - by Admin - 09-04-2020, 03:50 PM
RE: CQUAD4 in bending test - by Admin - 09-09-2020, 12:30 AM
RE: CQUAD4 in bending test - by Admin - 09-09-2020, 02:40 PM
RE: CQUAD4 in bending test - by drbillc - 09-09-2020, 05:35 PM
RE: CQUAD4 in bending test - by O_Stodieck - 09-09-2020, 06:27 PM
RE: CQUAD4 in bending test - by Admin - 09-09-2020, 07:13 PM
RE: CQUAD4 in bending test - by drbillc - 09-10-2020, 01:15 PM
RE: CQUAD4 in bending test - by Admin - 09-11-2020, 05:33 AM
RE: CQUAD4 in bending test - by Admin - 09-13-2020, 01:53 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)