+- MYSTRAN Forum (https://www.mystran.com/forums)
+-- Forum: MYSTRAN (https://www.mystran.com/forums/forumdisplay.php?fid=4)
+--- Forum: MYSTRAN (https://www.mystran.com/forums/forumdisplay.php?fid=5)
+--- Thread: Failure Theory values (/showthread.php?tid=78)
Failure Theory values - fmjs - 09-30-2021
Hello,
I'm using Mystran to test some composite structures, and I need the value of the Failure Theory layer by layer.
Is it possible to output the values for the Failure Theory index for all elements/layer? From the output, one can only get min and max at the summary.
Regards,
Filipe Silva
RE: Failure Theory values - Admin - 10-01-2021
It is possible, but I am not sure how useful that would be. In almost all real world cases, ply-based failure criteria are not effective. In fact, I would specifically advise against adding this feature in since it is very misleading. Incorporation of these failure theories into commercial FEA programs has lead to a lot of issues regarding how to analyze practical composite structures.
RE: Failure Theory values - fmjs - 11-26-2021
(10-01-2021, 04:21 AM)Admin Wrote: It is possible, but I am not sure how useful that would be. In almost all real world cases, ply-based failure criteria are not effective. In fact, I would specifically advise against adding this feature in since it is very misleading. Incorporation of these failure theories into commercial FEA programs has lead to a lot of issues regarding how to analyze practical composite structures.
Thank you for your reply.